Description
These sinktops feature a worktop, sink and sloping drainer moulded as a single seamless section.
Sinktops from this range incorporate a ribbed drainer area which slopes to an integrally moulded sink bowl. The units are cast oversize and then cut to the required size and configuration, from a minimum of 900 x 600 mm up to a maximum of 1500 x 900 mm and at any size in between. They are then fitted with edging from Simmons’ range as required.
Sinktops can be fitted directly onto steel supports or cabinets. There is no need to provide any additional support for these units.
When ordering please clearly state overall size of unit, left or right hand bowl and preferred position of sink within the unit. Any tap holes that are required should also be specified.
Two of these units can be combined to make up a double bowl double drainer sinktop. These would have a central joint machined ready to be jointed on site and would have edging all around the perimeter of the assembly. All jointing materials would be supplied as part of the package.
Please note that these drawings and photos are of these sinktops manufactured at a standard width of 750 mm. Single drainers can be made at any width from 600 mm up to 850 mm at no additional cost.
| Moulded Single Drainer Sinktops – Product Dimensions | ||||
|
Sinktop Ref.
|
Length | Width | Bowl Size | Waste Location |
| SD900 | 900 mm. | 600 to 850 mm. | 400 x 400 x 300 mm. | Next to drainer |
| SD1000 | 901 to 1000 mm. | 600 to 850 mm. | 400 x 400 x 300 mm. | Next to drainer |
| SD1200 | 1001 to 1200 mm. | 600 to 850 mm. | 400 x 400 x 300 mm. | Next to drainer |
| SD1400 | 1201 to 1400 mm. | 600 to 850 mm. | 400 x 400 x 300 mm. | Next to drainer |
| SD1500 | 1401 to 1500 mm. | 600 to 850 mm. | 400 x 400 x 300 mm. | Next to drainer |
Mechanical Properties/ Thermal Properties/ Radioactive Thermal Decompsition / Chemical Resistance
Reviews
There are no reviews yet.