Description
The sinks and troughs are manufactured from epoxy resin the material that offers a superb combination of features and benefits. It is durable, extremely chemical and stain resistant, mechanically strong and easily cleaned and decontaminated and exhibits good fire resistance, fire propagation and low smoke properties.
The sinks are all formed in one piece in a range of sizes. The sinks are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop. Sinks are simply bonded and screwed in place through this flange.
Code |
Int. Len. A |
Int. Wid. B |
Intl. Dep. C |
Ext. Height D |
Flan. Width E |
Flan. Thick. F |
Waste C/L from side G |
Waste C/L from rear H |
Waste Pos. |
Int. Rad. R |
Weight kg. |
SES2 |
160 |
160 |
150 |
170 |
28 |
10 |
80 |
80 |
Centre |
20 |
2 |
SVS3 |
250 |
200 |
150 |
170 |
28 |
12 |
125 |
100 |
Centre |
20 |
3 |
SDS5 |
300 |
200 |
185 |
200 |
31 |
10 |
75 |
100 |
End |
30 |
4 |
SA5-DIA |
356 |
254 |
152 |
167 |
29 |
6.5 |
178 |
127 |
Centre |
30 |
4 |
SQ6 |
300 |
300 |
200 |
215 |
35 |
10 |
150 |
85 |
Rear |
25 |
5 |
SS7 |
350 |
300 |
150 |
165 |
31 |
10 |
90 |
150 |
End |
30 |
4 |
SS6 |
350 |
300 |
200 |
215 |
30 |
10 |
85 |
150 |
End |
30 |
5 |
SKL7 |
380 |
350 |
200 |
215 |
31 |
10 |
190 |
85 |
Rear |
25 |
8 |
SN9 |
400 |
300 |
200 |
215 |
30 |
10 |
85 |
150 |
End |
30 |
6 |
SM8(W)-DIA |
450 |
368 |
130 |
145 |
29 |
9 |
225 |
85 |
Rear |
30 |
5 |
SM8 |
450 |
365 |
200 |
218 |
31 |
10 |
225 |
85 |
Rear |
30 |
6 |
SM8(X)-DIA |
450 |
365 |
280 |
295 |
31 |
10 |
225 |
85 |
Rear |
30 |
8 |
SR12 |
550 |
365 |
250 |
272 |
32 |
9.5 |
275 |
85 |
Rear |
30 |
11 |
SGL10 |
400 |
400 |
300 |
315 |
31 |
10 |
200 |
90 |
Rear |
30 |
9 |
SEL16-DIA |
600 |
450 |
295 |
309 |
35 |
10 |
300 |
90 |
Rear |
30 |
15 |
SPL14-DIA |
610 |
406 |
203 |
220 |
37 |
11 |
305 |
203 |
Centre |
30 |
10 |
SVL15-DIA |
635 |
381 |
254 |
265 |
29 |
6.5 |
317.5 |
190.5 |
Centre |
30 |
10 |
- Sink length and width dimensions given are nominal sizes only. There can be slight variations from sink to sink due to the nature of epoxy resin.
- # due to their weight and capacity these sinks require additional support from beneath when fitted
- Outlet position assumes that the sink is orientated with the longer side facing the front of the worktop.
- Sink weight will vary with colour. Weights shown are for grey.
- All dimensions in millimetres.
- The sinks are designed to accept a sink waste (73mm flange, 1 1/2″ BSP).
Glass Transition Temperature (Tg) – 120 – 130 °C
Tensile strength – 85 N/mm²
Tensile Modulus – 10,500 N/mm²
Elongation at break – 0.8%
Flexural strength – 112 N/mm²
Flexural Modulus – 10,000 N/mm²
Compressive Strength – 190 N/mm²
Coefficient of linear thermal expansion – 34 10-6
Water absorption-24 hours at 23°C – 5-10 mg (0.06-0.068%) ISO 62 (1980)
Thermal Properties
Thermal Shock – 2000 cycles (90 sec. at 75 °C, 90 sec. dwell, 90 sec. at 15°C) – No effect.
Should not be subjected to dry-ice or liquid nitrogen.
Smoke Emission – Low Smoke Emission – BS 6853 1999 App. D Clause d.8.4. Result – Ao(on) 8.75, Ao(off) 10.41
Flammability – Class 0 as classified by the current Building Regulations
Thermal Decomposition – 350° C
Radioactive Thermal Decompsition
Decontamination factor (geometric mean) – A5598
Deviation factor – 1.25
Ease of decontamination classification – “Excellent”
Chemical Resistance
Acetone – Unaffected
Acetonitrile – Unaffected
Aqua regia – Unaffected
Chloroform – Unaffected
Chloroform 100% – Unaffected
Chromic acid pickle (*1) – Unaffected
Dichloromethane – Surface attack
Dimethylformamide – Unaffected
Ethyl acetate – Unaffected
Hydrochloric acid 30% – Unaffected
Hydrochloric acid concentrate – Unaffected
Hydrofluoric acid 40% – Slight bleaching
Hydrogen peroxide – Unaffected
Methanol – Unaffected
n-Butanol – Unaffected
Nitric acid 70% – Very slight bleaching
Nitric acic concentrated – Slight yellowing
Nitric acid fuming – Attack and staining
Perchloric acid 0.1% – Unaffected
Phosphoric acid concentrated – Unaffected
Potassium hydroxide pellet (*2) – Unaffected
Sodium hypochlorite – Unaffected
Sulphuric acid 70% – Unaffected
Sulphuric acid concentrated – Surface attack
Xylene – Unaffected
Reviews
There are no reviews yet.