Description
Drop-in sinks are designed to be easily fitted to any type of worktop material. They can be simply dropped into a rebated cut-out in a worktop. The top face of the flange has a clean surface finish which can be fitted flush with the surface of the worktop. They are particularly suitable for use with laminate worktops as the core material of the laminate is covered by the flange of the epoxy resin sink.
With an undermount fitment (also known as ‘overhang’) sinks are simply bonded and screwed to the underside of the worktop through holes drilled in the flange. If sinks are supplied loose, the flanges can be pre-drilled with fixing holes at additional cost.
Sink Fitments
Undermount / Overhang fitment
Drop-in fitment
| Standard Undermount / Drop-in sinks | |||||||
| Sink Ref. | Internal Size | Waste Outlet Pos. (see diagram) | Undermount | Drop-in | Drop-on | Flush-fit | Weight |
| SES2 | 160 x 160 x 150 mm | Centre | Yes | No | No | No | 2 kg |
| SVS3 | 250 x 200 x 150 mm | Centre | Yes | No | No | Yes | 3 kg |
| SS7 | 350 x 300 x 150 mm | Centre / Rear | Yes | No | No | Yes | 4 kg |
| SKL7 | 380 x 350 x 200 mm | Centre / Rear | Yes | No | No | Yes | 8 kg |
| SN9 | 400 x 300 x 200 mm | Side / Centre | Yes | No | No | Yes | 5 kg |
| SM8 | 450 x 365 x 200 mm | Side / Centre | Yes | No | No | Yes | 7 kg |
| SPL14X | 610 x 406 x 300 mm | Centre | Yes | No | No | Yes | 13 kg |
| SGS2DI | 260 x 110 x 150 mm | Centre | Yes | Yes | No | No | 2 kg |
| SR12DI | 550 x 365 x 250 mm | Centre / Rear | Yes | Yes | No | Yes | 12 kg |
| SGR11DI | 500 x 400 x 300 mm | Centre / Rear | Yes | Yes | No | Yes | 12 kg |
| SD15DI | Sink & Drainer 860 x 346mm: Bowl 406 x 305 x 203mm | Side / Centre | No | Yes | No | No | 8 kg |
| SD55DI | Sink & Drainer 1067 x 423mm: Bowl 635 x 381 x 254mm | Side / Centre | No | Yes | No | No | 13 kg |
Mechanical Properties/ Thermal Properties/ Radioactive Thermal Decompsition / Chemical Resistance